|Place of Origin:||China|
|Brand Name:||WITGAIN PCB|
|Minimum Order Quantity:||negotiable|
|Packaging Details:||80pcs/bag, 20bags/carton|
|Delivery Time:||25 work days|
|Board Type:||HDI PCB||Layer Count:||8 Layer|
|Min Hole:||0.1MM||BGA:||10 Mil|
|Min Line:||3/3 Mil||Unit Size:||92*78mm/4up|
hdi printed circuit boards,
electronic pcb board
8 Layer HDI PCB Board , Finished Board Thickness 1.6MM , FR4 Material
8 Layer HDI PCB
Layer Count: 8Layer HDI PCB
Board Thickness: 1.6MM
Min Hole: 0.1MM
Min Line: 3/3 Mil
BGA Size: 10Mil
Unit Size: 92*78mm/4up
Hole: L1-L2, L2-L7, L7-L8, L1-L8
Solder Mask: Green
Surface Treatment: ENIG
|Layer Count||1-24 Layers|
|Finished Board Max Size||700mm* 800mm|
|Finished Board Thickness Tolerance||+/-10% +/-0.1(<1.0mm)|
|Major CCL Brand||KB/NanYa/LTEQ/ShengYi/Rogers Etc|
|Material Type||FR4,CEM-1,CEM-3,Aluminum,Copper,Ceramic, PI, PET|
|Drill Hole Diameter||0.1mm-6.5mm|
|Out Layer Copper Thickness||1/20Z-8OZ ;|
|Inner Layer Copper Thickness||1/3OZ-6OZ|
|PTH Hole Tolerance||+/-3mil|
|NPTH Hole Tolerance||+/-1mil|
|Copper Thickness Of PTH Wall||>10mil(25um)|
|Line Width And Space||2/2mil|
|Min Solder Mask Bridge||2.5mil|
|Solder Mask Alignment Tolerance||+/-2mil|
|Max Gold Thickness||200u'(0.2mil)|
|Thermal Shock||288C, 10s, 3 Times|
|LTest Capability||PAD Size Min 0.1mm|
|Surface Treatment||OSP, ENIG, HASL, Plating Gold, Carbon Oil,Peelable|
Question: What is the standard format you accept?
Answer: We accept standard gerber format file.
Question: Do you accept sample orders?
Answer: YES, we do accept sample orders.
Question: What is the difference between your two factories?
Answer: The HuiZhou factory mainly produce sample and small batch pcbs. The JiangXi factory has more roboticized equipments, so it prefers big batch production.
Question: What is a High-Density Interconnect PCB?
Answer: HDI stands for ‘High Density Interconnects’. An HDI PCB is a dense version of a printed circuit board where the components are placed closer to each other allowing the overall board size to be smaller. HDI printed circuit boards use optimized routing, smaller components, BGA component footprints and optimized vias to make connections between the components on the board.
In regular PCBs we use through hole vias to connect multiple layers of the board to each other. A traditional via goes from the top of the PCB to the bottom, connecting all the layers, as seen in the image below. These vias are easy to deploy as they can be drilled through the board from top to bottom using a regular drill. The main disadvantage of regular vias from a space optimization point of view is that this via will connect all the layers of the board, even those that do not need to be connected to each other and thus can result in wastage of space within some layers of the PCB.
An HDI PCB uses different types of vias – microvias, buried vias and blind vias to optimize the space requires for interconnections between the layers and components.
Microvias are ultra-small vias which can be drilled using lasers. They are much smaller in diameter than regular vias.
A Blind via connects the outer layer to an inner layer, with access to only one external layer.
A Buried via can connect inner layers of the same substrate or multiple substrates, with no access to external layers as seen below.
Blind or buried via gives access to only functionally required layers, and as a result do not occupy space on all the layers at a given time. This provides more space for components with enhanced routing within the traces. A designer can mount more components to increase the board density or can reduce the board size as per the requirement.
Advantages of an HDI PCB Board:
Contact Person: Steven