|No Of Layers::||8 Layer||Material::||FR4 TG150|
|PCB Thickness:||1.6 MM||Solder Mask Colour::||Blue Solder Mask|
|Surface Technics::||ENIG 1U'||Copper Thickness:||1/H/H/H/H/H/H/1 OZ|
WITGAIN 8 Layer PCB,
ENIG 8 Layer PCB,
Blue Solder Mask gps pcb module
8 Layer PCB Used In GPS Module Blue Solder Mask ENIG
1 8 Layer Printed Circuit Board with very high relability.
2 PCB drawing size is 118.8mm*115mm/12pcs
3 Copper thickness is 35 um on each layer
4 FR4 substrate material ,TG150 degree.
5 Surface treatment is immersion gold.
|1||Layer Count||1-24 Layers|
|3||Finished Board Max Size||700mm*800mm|
|4||Finished Board Thickness Tolerance||+/-10% +/-0.1(<1.0mm)|
|6||Major CCL Brand||KB/NanYa/ITEQ/ShengYi/Rogers Etc|
|7||Material Type||FR4,CEM-1,CEM-3,Aluminum,Copper, Ceramic, PI, PET|
|8||Drill Hole Diameter||0.1mm-6.5mm|
|9||Out Layer Copper Thickness||1/2OZ-8OZ|
|10||Inner Layer Copper Thickness||1/3OZ-6OZ|
|12||PTH Hole Tolerance||+/-3mil|
|13||NPTH Hole Tolerance||+/-1mil|
|14||Copper Thickness of PTH Wall||>10mil(25um)|
|15||Line Width And Space||2/2mil|
|16||Min Solder Mask Bridge||2.5mil|
|17||Solder Mask Alignment Tolerance||+/-2mil|
|19||Max Gold Thickness||200u'(0.2mil)|
|20||Thermal Shock||288℃, 10s, 3 times|
|22||Test Capability||PAD Size min 0.1mm|
|24||Surface Treatment||OSP, ENIG,HASL, Plating Gold, Carbon Oil,Peelable Mask etc|
Q1:What is PCB Grid Testing or Bed of Nails Testing?
A1: Grid testing or Bed of Nails testing is a process used to check the performance of components mounted on a PCB board. This test uses a frame/fixture that contains various pins inserted into an epoxy phenolic glass cloth laminated sheet (G-10) in order to access all the PCB test points. These pins act as sensors which are aligned to make contact with the test points on the PCB board and are also connected with a measuring unit through wires. The position of the pins is designed and customized for each PCB based on the components or points on the board that need to be tested.