|Layer Count:||2 Layer||Material:||PI|
|Board Thickness:||0.15 MM||Min BGA:||8 MIL|
|Board Size:||105 Mm*250 Mm||Surface Treatment:||Immersion Gold 2U'|
FPC 2 Layer 0.15MM Thickness Black Solder Mask Flexible Circuit
1 2 Layer FPC with PI Material.
2 The PCB is customized product. It was produced according to customoer's gerber design and requirement.
3 The solder mask is green solder mask and copper thickness is 1oz each layer.
4 The surface treatment is immersion gold and gold thickness is 2u'.
5 Black solder mask ink.
6 Used in consumer electronics.
Our Production Capability:
|1||Layer Count||1-24 Layers|
|3||Finished Board Max Size||700mm*800mm|
|4||Finished Board Thickness Tolerance||+/-10% +/-0.1(<1.0mm)|
|6||Major CCL Brand||KB/NanYa/ITEQ/ShengYi/Rogers Etc|
|7||Material Type||FR4,CEM-1,CEM-3,Aluminum,Copper, Ceramic, PI, PET|
|8||Drill Hole Diameter||0.1mm-6.5mm|
|9||Out Layer Copper Thickness||1/2OZ-8OZ|
|10||Inner Layer Copper Thickness||1/3OZ-6OZ|
|12||PTH Hole Tolerance||+/-3mil|
|13||NPTH Hole Tolerance||+/-1mil|
|14||Copper Thickness of PTH Wall||>10mil(25um)|
|15||Line Width And Space||2/2mil|
|16||Min Solder Mask Bridge||2.5mil|
|17||Solder Mask Alignment Tolerance||+/-2mil|
|19||Max Gold Thickness||200u'(0.2mil)|
|20||Thermal Shock||288℃, 10s, 3 times|
|22||Test Capability||PAD Size min 0.1mm|
|24||Surface Treatment||OSP, ENIG,HASL, Plating Gold, Carbon Oil,Peelable Mask etc|
Q1: What are Flexible Printed Circuit Boards?
A Flexible Printed Circuit Board (PCB) is a board that can be bent to conform to a desired shape during its application. The board can be bent or twisted without damaging the circuit. The substrate material used to build the PCB is responsible for its flexibility. Polyamide, PEEK (Polyether ether ketone) or a transparent conductive polyester film are common substrates used to make flexible PCBs.
The layers of a Flex PCB are more or less the same as a Rigid PCB, with the addition of an overlay, or coverlay i.e. a lamination process used to encapsulate and protect the external circuitry of a flex circuit. This is similar to the solder mask layer in a rigid PCB. The coverlay film is a polyimide film which is coated with a thermoset adhesive. It protects the flexible circuit from damage. The coverlay is optional, but most flexible PCBs do use this.
The fabrication of flexible PCBs does cost more than rigid PCBs, however they have a number of advantages in certain applications and thus the cost can be justified. For example, they can replace bulky wiring in Satellites where space and weight are the main constraints for the designers. They are also in LED Strips, consumer electronics and a number of other applications.
Other advantages of flexible Printed circuit boards are that they are lighter than rigid boards and have improved resistance to vibrations and movement so are often used in transportation applications.